Zoek op trefwoord, order- of productcode of serienummer, bv. “CM442” of “Technische informatie”
Voer tenminste 2 karakters in om het zoeken te starten.
  • Geschiedenis
Productafbeelding SS500  1-kanaals H2O, gasanalyzer, weergave onder een rechte hoek

SS500 vochtanalyzer

Uiterst betrouwbaar en aangepast op de behoeften van de aardgasindustrie

SS500
Please Wait (spinning wheel)
Prijzen worden geladen
Prijzen tijdelijk niet beschikbaar
Price on request
Bezig met activeren van prijs
Prijs: Informatie verstrekken
from CHF ??.-
Filter meting-/ toepassingstaak
Meet-/toepassingstaak

Configureer om de CAD-tekeningen van dit product te downloaden

  • Meetprincipe

    TDLAS

  • Product Headline

    An economical gas analyzer for moisture (H2O) in the natural gas industry. The sensor measures gas using tunable diode laser absorption spectroscopy (TDLAS) to determine the concentration of the gas without coming into physical contact with the stream. Option of simplified sample conditioning to reduce complexity of the analyzer system.

  • Channels

    1

  • Analyte and Measurement ranges

    H2O (Moisture):
    5 to 422 ppmv (minimum)
    5 to 2110 ppmv (maximum)

  • Measured Variables

    Concentration
    Dew Point
    Cell Pressure
    Cell Temperature

  • Ambient Temperature range

    -20 to 50°C (-4 to 122°F)

  • Operating Pressure range

    Inlet Pressure: 140 to 350 kPa (20 to 50 psig)
    Sample Cell: 700 to 1400 mbara

  • Analyzer Wetted materials

    316L stainless steel
    FKM O-Rings
    Glass

  • Power supply

    100 to 240 VAC, 50 to 60 Hz
    or
    9 to 16 VDC or 18 to 32 VDC - optional
    1 Amp maximum at 120 VAC
    1.6 Amps at 24VDC, 3.2 Amps at 12 VDC

  • Communication

    Analog Output: 1 or 2 4-20mA Isolated, 1200 ohms at 24 VDC max load
    Serial: RS232C
    Protocol: Modbus Gould RTU or Daniel RTU or ASCII
    Alarms: 2, General Fault and Concentration Alarms via Modbus and Analog Output(s)

  • Housing materials

    Electronics: 304 stainless steel (Class I Division 2)
    Sample System Panel: anodized aluminum

  • Hazardous area approvals


    CSA Class I, Division 2
    CSA Class I, Zone 2

  • Degree of protection

    Type 3R (Class I Division 2)