Overzicht specificaties
-
Ambient temperature range
+5 °C ... +35 °C
Temperature change maximum ±10 °C/h
With cooling device +5 °C ... +45 °C
Temperature change ±10 °C/h maximum; other temperatures on request -
Process temperature
≤ +1,300 °C
Depending on sampling probe -
Process pressure
800 hPa ... 1,200 hPa
Toepassingsgebied
The MCS300P HW is a hot/wet extractive analyzer system for measuring gases. It detects IR- or VIS-active components with variable measuring ranges for monitoring and regulating combustion processes and exhaust gas purification systems. The heated system components prevent the water and acid dew points from being undercut. This results in low maintenance requirements, high reliability and long-term system stability, even under rough and difficult
application conditions.
Monitoring of flue gas conditioning in waste or sewage sludge incinerators
Monitoring of the scrubber in flue gas conditioning
Measurement directly at the kiln inlet in cement plants
Device properties:
Simultaneous measurement of up to 6 components plus O2
Temperature of the system components up to 200 °C
Automated sample point switching for up to 3 sample points
Automated adjustment to the zero and reference point
Integrated adjustment of the device without test gas
Flexible I/O module system
Voordelen
Economic, automatic adjustment without expensive test gases
Easy remote control by integration in existing networks
Automatic control of the complete measuring system and probe
Low maintenance and reliable due to hot measurement
In combination with probe SCP3000 also for measurements at high dust loads and high temperatures
Short response time due to high sample gas flow
Xpert selectie
-
Gespecialiseerde producten
- Ontworpen voor veeleisende applicaties
Technische topkwaliteit
Eenvoud
Variabel
-
Eenvoudige producten
- Gemakkelijk te selecteren, installeren en gebruiken
Technische topkwaliteit
Eenvoud
-
Standaardproducten
- Betrouwbaar, robuust en onderhoudsarm
Technische topkwaliteit
Eenvoud
-
Gespecialiseerde producten
- Ontworpen voor veeleisende applicaties
Technische topkwaliteit
Eenvoud
Variabel
| FLEX selectie | Technische topkwaliteit | Eenvoud |
|---|---|---|
Fundamental selectie Voldoe aan uw basismeetvoorwaarden |
Technische topkwaliteit
|
Eenvoud
|
Lean selectie Beheers eenvoudig uw belangrijkste processen |
Technische topkwaliteit
|
Eenvoud
|
Extended selectie Optimaliseer uw processen met innovatieve technologieën |
Technische topkwaliteit
|
Eenvoud
|
Xpert selectie Beheers uw meest uitdagende applicaties |
Technische topkwaliteit
|
Eenvoud
Variabel |
Loading alternative products
Succesverhalen
-
-
Competentiebrochure (CP)
Emission Monitoring Solutions – broad instrument portfolio and longstanding experience
An overview brochure about emission monitoring, their measuring
principles and technologies, global requirements and services, a
selection guide and the measuring devices at a glanceTaal:
Engels
Versie:
01/01/2025
Bestandsgrootte:
4.5 MB
Bestandsnaam:
8029975_CP_Emission_Monitoring_Solutions_en_V3-0_2025.01_EHS.pdf
-
-
-
Innovatie (IN)
Shelter Solutions – Space and protection for measurement and analysis technology
Shelter solutions are primarily used to protect the installed analyzer systems from extreme ambient conditions such as heat, cold,
dust, wind, earthquakes and corrosive or explosive atmospheresTaal:
Engels
Versie:
01/01/2025
Bestandsgrootte:
4.9 MB
Bestandsnaam:
8030010_IN_Shelter_Solutions_en_V1-0_2025.01_EHS.pdf
-
-
-
Innovatie (IN)
MCS300P HW – hot/wet extractive analyzer system for process gas measurements
The MCS300P HW is a hot/wet extractive analyzer system for measuring process gases.
Taal:
Engels
Versie:
01/01/2025
Bestandsgrootte:
2.1 MB
Bestandsnaam:
8030618_IN_MCS300P HW_en_V1-0_2025.01_EHS.pdf
-
-
-
Verificatie DTM
MCS300P HW SDD file
SOPAS device description file for MCS300P HW
Taal:
Language neutral
Versie:
13/04/2018
Bestandsgrootte:
16 MB
Bestandsnaam:
MCS300P HW SDD file
-