Zoek op trefwoord, order- of productcode of serienummer, bv. “CM442” of “Technische informatie”
Voer tenminste 2 karakters in om het zoeken te starten.
  • Geschiedenis
Flowfit CPA25 - Doorstroomarmatuur met beschermkap tegen spatten

Flowarmatuur
Flowfit CPA25

Universele armatuur voor de water- en afvalwaterindustrie en industriële hulpprocessen.

CPA25
Please Wait (spinning wheel)
Prijzen worden geladen
Prijzen tijdelijk niet beschikbaar
Price on request
Bezig met activeren van prijs
Prijs: Informatie verstrekken
from CHF ??.-
Filter meting-/ toepassingstaak
Meet-/toepassingstaak

Configureer om de CAD-tekeningen van dit product te downloaden

  • Meetprincipe

    Potentiometric

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Meetprincipe

    Amperometric oxygen measurement

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Meetprincipe

    Conductive

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)

  • Meetprincipe

    Amperometric oxygen measurement

  • Application

    Water, Wastewater, Utilities

  • Installation

    Flow assembly

  • Characteristic

    Piping, bypass, branch line

  • Design

    '- Three PG13.5 sensor ports (shaft length 120 mm)
    - calibration direct in the holder possible with a removable calibration cap

  • Material

    Holder: Polypropylene PP
    Sealing: EPDM or FKM available

  • Process temperature

    0 to 80°C
    (32 to 176°F)

  • Process pressure

    max. 6 bar at 20°C
    (87 psi at 68°F)